Hot Water Cylinder Hacks To Save On Your Power?

Having a reliable source of hot water can be a great comfort, whether you are looking to heat up with a nice bath or trying to get all of your dishes washed. However, even though heated water is a necessity for most, overuse of hot water can make your power bill rise. Lets explore Hot Water Solutions.

Don’t fret; you do not have to choose between a lowered power bill and comforting heated water. There are habits you can develop that will save you both power and money.
drain

How Can I Save Power When Using My Hot Water Cylinder?

Like any other helpful home feature, installing a hot water cylinder into your home will come with upfront costs that will depend on what kind of heating system you purchase. Of course, heating water will affect your power bill, but you can reduce your bill’s size through intelligent practices and habits while still living a cozy life. So, how exactly do you save energy while using a hot water cylinder? If you take note of the following life hacks, you will see just how easy it can be to save power. Adopting new habits can be tricky at first, but they will undoubtedly pay off in the future. A hot water cylinder thermostat is a device that controls the temperature of the water in your hot water cylinder. It is usually located on the side of the cylinder, and it is connected to the heating element. The thermostat senses the temperature of the water, and it turns the heating element on or off as needed to maintain the desired temperature. If your hot water cylinder thermostat is not working properly, it can cause a number of problems, including:
  • No hot water. If the thermostat is not working, the heating element will not turn on, and you will not have hot water.
  • Warm water. If the thermostat is set too low, the water in your cylinder will not reach the desired temperature.
  • Overheating. If the thermostat is set too high, the water in your cylinder could overheat and cause damage.
If you think your hot water cylinder thermostat is not working properly, you should have it checked by a qualified plumber. They can diagnose the problem and replace the thermostat if necessary.

Here are some tips to get you started on your power-saving journey:

Lower The Temperature. Most hot water cylinders are installed with the thermostat set at around 49 degrees celsius. However, most people do not need their water to be this hot. If you want to save power, you should try to lower the temperature and see what works for you.

When the temperature is lower, it will take less power to heat up your water and thus save energy.

Repair Faulty Or Leaky Faucet. Chances are, you have dealt with a leaky faucet at some point in your life. While at first, they may seem like just an annoying little thing that you need to deal with, they can actually waste a lot of water over time!

A leaky faucet can waste around and over 18 litres per day, and that waste can seriously add up. So by noticing these problems and fixing them as soon as you can, you’ll save a lot of water and money.

Don’t Use Hot Water When You Don’t Need It. This habit is something that many people already do, but it is still something that you should keep in mind. When you utilise the water in your home, you should only use hot water when you need it – for showers, baths and more. When you do not need it to be heated, you should stick to cold water whenever you can.

Therefore, when you brush your teeth or wash your hands, try to stick to unheated water. Even if you’re used to using hot water for these tasks, getting used to the lower temperature shouldn’t be hard, and you’ll even up saving energy as a result.

Periodically Drain Your Storage Tank. When your water storage tank holds hundreds of litres of water over a long period of time, there’s a chance that sediment will build up inside of it. If that sediment builds up too much, it can cause problems in the future that may lead to extra expenses that could have been avoided.

By draining your water storage tank, you can get rid of that sediment early so that it does not linger and become a nuisance. If you have trouble doing this procedure yourself, you should contact a qualified professional to help you out.

Set A Timer To Turn Off The Heat At Night. Most water heating systems constantly run, which means they’re working even when no one else is needing them. Over time, this wastes energy and can even lower your system’s lifespan. To prevent this issue, you can have a timer installed onto your heating system if one is not already implemented.

If you would like to have a timer put in, you should contact a knowledgeable plumber to help you out. Even though installing the timer might cost some money, it will definitely save you cash in the future.

Where Can I Get An Excellent Water Heating System For My Home?

Is your mind now racing with ideas on how to save energy? When you implement these simple changes into your daily life, you will surely see their effect on your monthly bills!

Are you looking to speak to professional plumbers or gas-fitters about your hot water cylinder? If so, please do not hesitate to contact our team at 0800 497658 to get in touch.

At Hot Water Solutions, all we do is hot water, and we strive to provide New Zealanders with high-quality water heating products. Keep you and your family warm and cozy with reliable heated water!

Share this story

Related articles