Easy Hot Water Cylinder Repairs And Maintenance Tasks That You Can Do Yourself
Hot water systems can look rather intimidating if you don’t know much about them. After all, they deal with heat and are invaluable to your modern lifestyle, so you certainly don’t want to do anything that could harm them.
Many people immediately think to call their plumber when any issue occurs. But did you know that there are some simple tasks that you can do on your own? These tips are fairly easy to follow, and most people can do them themselves without the need of a professional.
A few common repairs or maintenance tasks you can do yourself are:
Checking The Insulation. Your hot water cylinder can lose heat quickly through the walls of its tank or through the pipes around it. Auckland hot water cylinder repairs won’t do much for this problem because this is all about insulation.
When you insulate something, your goal is to provide it with a layer of thermal protection to prevent heat loss. Insulating hot water cylinders is pretty straightforward because you can purchase insulation blankets that are specifically meant for hot water heaters and water storage tanks.
Please follow the recommended instructions when you insulate your tank. You may need to trim your blanket to make sure it properly fits your home’s tank. Remember to always measure twice or thrice so you don’t make a measurement mistake!
Correctly insulating a tank can prevent heat loss. When your system loses less heat, it’ll need less energy to warm up more water, and you’ll save money down the track.
These Auckland hot water cylinder repairs don’t just work for hot water systems themselves – it’s also a smart idea to insulate the hot water pipes around your system. Doing both of these tasks will maximise your system’s insulation and prevent even more heat loss.
Change The Thermostat. Is your home’s hot water a bit too hot or too cold for your liking? No worries; you don’t have to stick with water that’s making you uncomfortable. You can actually alter or completely change the thermostat yourself if you use the right tools and get the right parts.
You may want to check your water’s current temperature before you make any changes. To do this:
- Get a glass for the water.
- Wait a minute for the water to reach its maximum heat while being careful not to hurt yourself.
- Check the water’s temperature and determine if you want to change it.
If your water’s temperature does not change at all when you alter your thermostat, it may be broken, and you should have it fixed.
Drain Your Water Storage Tank. Many Auckland hot water cylinder repairs and maintenance tasks are pretty simple. This is one that you should be doing at least once a year – flush out your water storage tank to get rid of any built-up sediment.
Sediment can build up in your tank over time, and these bits of debris can cause trouble by rattling around and damaging your tank. Luckily, draining a storage tank is pretty easy.
Properly drain your storage tank. When the tank fills up again, drain it once more. Keep doing this until the water that comes out is clean, showing that there is no more sediment to be found.
Signs It’s Time To Call In The Professionals
These tasks may be simple and easy for some, but it’s extremely important to know that just because they’re straightforward on paper doesn’t mean you should force yourself to do them if you’re uncomfortable or unsure of what to do. Your hot water cylinder is very important, so Auckland hot water cylinder repairs should be done properly if you want to keep it in good condition.
There are some instances in which you should call a well-trained professional rather than doing it yourself:
- Your Cylinder’s Problems Are Too Complicated For You To Handle. Even if you know what’s wrong with your system, you might not be experienced enough to fix it. Don’t worry; that’s what the professionals are for! Even a straightforward job like fixing leaky pipes can be difficult for some people. There’s nothing wrong with relying on well-trained professionals to lend you a hand when you need assistance.
- You Can’t Identify What’s Wrong With Your Cylinder. It’s one thing to be aware of what’s wrong with your cylinder and to know how to fix it; it’s another to be completely stumped on what to do. You should never attempt to fix your cylinder if you’re facing issues that you don’t know how to handle. A skilful professional can examine your system and determine what’s wrong and how to remedy the problem.
Where You Can Call When You Need A Professional In Aotearoa
If you’re experiencing problems with your system and are in need of professional Auckland hot water cylinder repairs, there’s one place you should call – us at Hot Water Solutions!
All we do is hot water, and we’re well prepared to help. We’re very proud to provide New Zealand with helpful repair services. You can call us on 0800 497658 if you need some help.
We also have an amazing selection of hot water heaters and products in our online store, come and have a look!
Hot Water Solutions: we help Aotearoa stay comfortable and happy!
