Rheem Cylinder 300L SS

Rheem Stainless Steel (SS) mains pressure water heaters are generally heated with electricity but are also heat pump and solar compatible. With up to a 40L per minute flow rate, you can have multiple showers and taps running while maintaining a stable shower temperature.

Designed and assembled in New Zealand for New Zealand conditions. Manufactured from high quality Stainless Steel. With its colourbond jacket, this range is a great solution for both indoor and outdoor installation.

Able to connect to a range of Heat Pump and Solar technologies including direct/indirect or top down external heat sources. 135L model is not Heat Pump/Solar compatible.

Option for 3kW: some old house wiring will not take a 3kW electrical draw and cannot be changed. Using the 3kW option provides a slight efficiency gain with heating the water faster.

Installation Options:

Low/Mains Pressure to Mains Pressure Internal

• Drain,disconnect and remove existing mains pressure hot water cylinder and valves
• Installation of safe tray
• Supply and installation of mains pressure hot water cylinder,valves and pipework
• Installation of cylinder restraint kit
• Electrical work for new internal switch in cupboard to cylinder
• Electrical safety cert
• Test and commission installation
• Remove all associated rubbish from site

Low/Mains Pressure Internal to Mains Pressure External

• Drain,disconnect and remove existing mains pressure hot water cylinder and valves
• Installation of concrete paver on cement
• Supply and installation of mains pressure hot water cylinder,valves and pipework
• Installation of  stainless steel cylinder restraint kit
• Electrical work for new external weather proof switch and wiring
• Electrical safety cert
• Test and commission installation
• Remove all associated rubbish from site

Mains Pressure External to Mains Pressure External

• Drain,disconnect and remove existing mains pressure hot water cylinder and valves
• Installation of concrete paver on cement
• Supply and installation of mains pressure hot water cylinder,valves and pipework
• Installation of  stainless steel cylinder restraint kit
• Electrical work for new external weather proof switch and wiring
• Electrical safety cert
• Test and commission installation
• Remove all associated rubbish from site

Gas Internal to Mains Pressure Internal

• Drain,disconnect and remove existing mains pressure hot water cylinder and valves
• Remove existing flue and patch roof penetration
• Test existing gas installation is sound
• Cap gas line
• Installation of safe tray
• Supply and installation of mains pressure hot water cylinder,valves and pipework
• Installation of cylinder restraint kit
• Electrical work for new internal switch in cupboard to cylinder
• Electrical safety cert
• Test and commission installation
• Remove all associated rubbish from site

Gas Internal to Mains Pressure External

• Drain,disconnect and remove existing mains pressure hot water cylinder and valves
• Remove existing flue and patch roof penetration
• Test existing gas installation is sound
• Cap gas line
• Installation of concrete paver on cement
• Supply and installation of mains pressure hot water cylinder,valves and pipework
• Installation of  stainless steel cylinder restraint kit
• Electrical work for new external weather proof switch and wiring
• Electrical safety cert
• Test and commission installation
• Remove all associated rubbish from site

• Read more about this product here.
• For warranty information, please visit our warranty policy page.
• Use our online chat facility to ask any questions!
• * Auckland, Hamilton, Wellington, Christchurch, Dunedin, Tauranga, Mt Maunganui, New Plymouth, Whanganui, Palmerston North, Lower Hutt, Invercargill, Napier, Nelson, Queenstown, Wanaka.