You are here:
Description
Characteristics
No Reviews
Description
Working differently from traditional storage water heaters, gas continuous flow water heaters only heat water on demand rather than heating and storing water until needed. Appliances can be conveniently mounted to, or recessed into, your exterior wall, taking up less space. They are ideal for homes with high peak loads or when hot water is required occasionally such as at a holiday home.
- Flamesafe overheat protection
- 6 star energy rating
- Digital display for easy fault diagnosis and service
- Frost protected down to –20°C
- Rheem EZ Link® compatible to link two units for increased delivery
- Optional remote temperature controllers
Installation Options:
Califont to califont replacement
- Test existing gas installation is sound
- Disconnect and remove existing unit
- Supply and hang new unit
- alter existing pipework to suit new unit
- Installation of new isolation valves
- Test and commission installation
- Gas cert
- Remove all associated rubbish from site
Existing Cylinder to Gas Continuous Flow LPG
- Drain,disconnect and remove existing low pressure storage cylinder
- Remove existing pipework and valves
- Supply and hang new Continuous flow unit on external wall
- Installation of limiting and line strainer valve on main water line in or under new hot water unit
- Run hot and cold pipework from new unit and connect to existing pipework
- Supply and installation of adjustable LPG auto changeover regulator and external copper piping and valves
- Run new gas pipework from regulator to hot water unit
- Electrical work to new external RCD power point
- Electrical safety cert
- Test and commission installation
- Gas cert
- Remove all associated rubbish from site
Existing Cylinder to Gas Continuous Flow Natural Gas
- Drain,disconnect and remove existing low pressure storage cylinder
- Remove existing pipework and valves
- Supply and hang new Continuous flow unit on external wall
- Installation of limiting and line strainer valve on main water line in or under new hot water unit
- Run hot and cold pipework from new unit and connect to existing pipework
- Installation of gas pipework from meter position to new hot water unit
- Connect gas pipework to meter and hot water unit
- Electrical work to new external RCD power point
- Electrical safety cert
- Test and commission installation
- Gas cert
- Remove all associated rubbish from site
- Read more about the product here.
- For warranty information, please visit our warranty policy page.
- Use our online chat facility to ask any questions!
- * Auckland, Hamilton, Wellington, Christchurch, Dunedin, Tauranga, Mt Maunganui, New Plymouth, Whanganui, Palmerston North, Lower Hutt, Invercargill, Napier, Nelson, Queenstown, Wanaka.
Characteristics
Weight | 16 kg |
---|---|
Dimensions | 9 × 36 × 52 cm |
Supplier | |
Installation | Pickup, Install from existing cylinder, Install from existing gas unit, Deliver to major cities*, Deliver outside major cities |
Gas Type | LPG, Natural Gas |
No Reviews
Be the first to review “Rheem Gas 20” Cancel reply
Reviews
There are no reviews yet.