Haier Heat Pump Hot Water 250L

The Haier Heat Pump Hot Water technology results in a 70-79% reduction in electricity used to heat the same volume of water compared to an electric-resistance water heater. It is highly efficient compared to electric resistance or gas water heaters, complements Solar PV systems, runs only on electricity, and uses the natural refrigerant R290. The performance of the Haeir Heat Pumps in most New Zealands climates from -7C to 45C ambient air temperature. Furthermore, the unit uses the SmartHQ™ app on your smartphone to easily select from five modes to best suit your needs, allowing you to adjust heating to lower-cost periods, minimise energy use when you’re on vacation, or prioritise solar energy to reduce grid-supply if you have Solar PV.

Low GWP Refrigerant: Our Heat Pump Water Heater uses R290 which has a global warming potential (GWP) of 3. Many heat pumps use R134A. R290 has a global warming potential that is 476 times lower than R134A. As many refrigerants are strong greenhouse gases, the use of refrigerants with low GWP is seen as a way to minimise the effect of refrigeration systems on global warming.

Eco Mode: Eco mode optimizes the benefits of Solar PV and lower cost, time-of-use electricity.The Solar optimisation mode (PV) and time-of use mode (HC) receive a communication signal from an energy management control system (if you have an existing Solar PV system). Alternatively, a timer is used to set heating to the low cost periods of a time-of-use tariff.

Longevity: Using patented technology with a triple layer protection creates a long lasting, acid and alkali corrosion resistant inner tank. The inner tank is tested to over 160,000 cycles to ensure durability over the expected lifetime.

Connected: Built in Wi-Fi module and SmartHQ™ allows control of the appliance from anywhere. Change between five user modes at the tip of your fingers by opening SmartHQ™ on your smartphone.

Installation of the Haier hot water heat pump includes:

• Drain, disconnect and remove existing low/mains pressure storage cylinder
• Remove existing pipework
• Supply and installation of Haier 250L hot water heat pump
• Installation of stainless steel cylinders restraints
• Installation of copper pipework and valves
• Installation of lagging to external hot water pipework
• Run hot and cold pipework from existing Hot Water Cylinder position to heat pump position
• Run condensate drain
• Electrical work
• Electrical safety certificate
• Test and commission installation
• Removal all associated rubbish from site

• Find out more about this product here.
• For warranty information, please visit our warranty policy page.
• Use our online chat facility to ask any questions!
• * Auckland, Hamilton, Wellington, Christchurch, Dunedin, Tauranga, Mt Maunganui, New Plymouth, Whanganui, Palmerston North, Lower Hutt, Invercargill, Napier, Nelson, Queenstown, Wanaka.